Clover Mill offers an alternative to short run traditional diecutting. 

Our Oce’ Arizona 550 XT and the Gerber M3000 Turbo with print to cut registration and routing capabilities, your creative team can “think outside the box”

Prototyping and short runs can be expensive and time consuming using the traditional methods.  Creating a die and printing can be very expensive for short runs.

At Clover Mill our digital printing and  die-cutting starts with your design files you create or if you don’t have a design and need help Clover Mill can assist with your entire project start to finish. 

Once a design and dielines are created we print direct to substrate and add special print registration marks that our M-Turbo uses to register and cut out your design. The M-Turbo’s registration sensor guarantees each piece is diecut perfectly, giving a professionally digitally diecut piece with every cut. 

The M Turbo has several tools allowing Clover Mill to print and cut most substrates from the thinnest up to 2” thick. 

If you’re in need of one print and contoured cut of .5” thick Gator board and the same print and cut in .250” Falconboard and 500 intricate cuts on SBS stock we can handle it!

Clover Mill can produce a high quality cost efficient digitally printed diecut part that will get you noticed. 


We can digitally diecut most materials from  and our Oce 550XT allows us to print on almost any substrate up to 2” thick. 
  • Gatorfoam
  • Wood
  • Sintra
  • Styrene
  • Coroplast
  • Lexan, Acrylic & Glass for Backlit Applications 
We've done jobs as small as a business card and as large as 10′ x 8′ 
per piece, so size is seldom an issue. 

Go ahead and give your graphics a creative edge, at 
Clover Mill we make your ideas come to life.

Clover Mill Gets You Noticed!

Picture








  • Superior image quality powered by Océ VariaDot™ imaging technology
  • Near-photographic image quality with sharpness only before seen at resolutions of 1,440 dpi or higher
  • The ability to vary the drop size to as little as 6 picoliters produces sharp images with smoother gradients and quartertones
  • CMYK + White - UV curable inks that will last 2 years depending on location and media-type
  • Rigid Media 98.4" wide x 120" long x 2" Thick.
  • Roll Media up to 86.6".

Digital Diecutting & Prototyping

Picture












Bring your ideas to life!  
Our Gerber M3000 Turbo is a robust and versatile cutting & routing system. Our M3000 Turbo offers a cutting size of 75" x 120" and thicknesses up to 3".  Print to cut is effortless using the Mvision-cut®—a unique automatic registration device that allows for the output of accurate small lot production quantities from a virtually unattended system.   
Picture
Poly cutting
Picture
Metal Printing - Above Image has Matte Finish
Picture
Eco Friendly Falconboard Products